@Everyone Sorry I haven't been on here lately... after some people have commented it has re-sparked my interest in the app. I have been working on a completely redesigned version but unfortunately it is very slow and still needs much reworking. @Mr Grumpy With the USB plugged in try: ls /dev | grep ...

Yep, the problem was a permission issue. If you this error message in the extensions-error log under (.config/inkscape) Extension "InkCut v1.0" failed to load because a dependency was not met. Dependency: type: executable location: extensions string: inkcut/inkcutext.py Try this command su...

I was able to work around the other problem, but I can't get Inkcut to cleanly cut rectangles. Even in the preview, with offset and overcut turned off, one edge of each rectangle is slanted. Any ideas? http://rcheliguy.dyndns.org/temp/inkcutproblem.jpg -Farrell Looks like another bug, I think it as...

Thanks for this! I'm really excited to be able to cut in linux. I'm noticing a few problems. - When I tell the program to cut more than one image, it seems to stack them over itself, basically cutting itself twice. I can work around this and just duplicate the graphic in inkscape, but I figure I'd ...

Open a termainal and post the result of
and try checking out this
http://ubuntuforums.org/showthread.php?t=1334092&page=3

Hi there I have a creation ct-630 and it cuts fine if the file is small but if the file is to big and detailed it stops at some point. I have printed to file and used (split) to split the file in chunks of 100000 bytes and if i send them 1 by 1 waiting for the machine to stop before sending the oth...

Great extension, been after something like this for a long time. Actually ran a plotter that my sign program in Win would not. I did have to install a couple of files to make it work in Kubuntu Lucid: librsvg2-common python-serial (as stated in readme) The plotter is a Creation, only problem was th...

Hi there, thanks for the great plugin. Just a little bug, when cutting there is a gap between the starting point and end point I tried playing with the overcut and blade offset to no avail... Nothing changes in the cutting when i change those values ? My machine is a creation pcut CT-630. ps. I had...

sorry i have been gone a while been working alot everyday since may - but im back on and off still working alot here is what you requested ken@gateway-desktop:~$ ls .config/inkscape/extensions/ app copying doc inkcutext1.inx inkcutext.py readme ken@gateway-desktop:~$ i removed all the files and tri...

I am French and I not mastery not the Englishman. This is an IT translation. With Inkcut I have these error messages: Traceback (most recent call last): File "/home/gabriel6522/.inkscape/extensions/inkcut2.py", line 281, in <module> effect.affect() File "/usr/share/inkscape/extension...

moving this to http://inkcut.sourceforge.net
I want to add countour cutting features soon, i've yet to find out how. I'll put it on the todo list.

btw thanks for the dontation stefann!

#1, correct, I changed that and forgot to update the tooltip For #2, it does represent the width of the material (it's sized by the material width given), however this is not the "cutable" width. It assumes that the blade is lined up with the edge of the material, then adds the margin and ...

Second, something for the wishlist: an option 'mirror' would be great. I'm cutting garment venyl films for textile printing so I always have to plot a mirrored version of the images. OK, sorry - I just found the axis -frame with the Invert y-axis option. But there's a problem: The Add Stacks -optio...

cmwyke wrote:i managed to get 0.2 working, 1.0 wouldn't work though. Anyone got an MH cutter working via USB under Linux?

Were there any errors for 1.0 or would it just not show up under the menu?

i havent tried ver 1.0 untill today what am i doing wrong i have everything moved to the extensions folder and i do have python installed here is a pic of inkscape all that shows up is a small rectangle next to inkcut in the drop down Post this, seems as if i may have not had something setup right....

i love your program but i have one problem, no matter what i do it cuts the inverse of what i need. I have a refine mh-635 and have tried putting a check next to the axes but it doesn't seem to do anything. Any help would be appreciated. By inverse do you mean mirrored over the x axis? If so, check...

Below is the old versions 0.1 and 0.2 for reference Here's how to use it.... 1. Open your svg 2. Select the path you want to cut, it must be at least one path, no groups, no objects. http://lh6.ggpht.com/_CkfrACggM6Q/S70i59UlaqI/AAAAAAAAAfU/BYveoY06EcU/s800/Screenshot.png 3. Open the InkCut Extensio...

what program are you using to cut?

looks like signcut is using dmpl or some other language that i'm not yet aware of, Interesting.... much smaller file size.... my signcut le ran out of liscense's so i'm going to be sniffing signblazer & possibly flexi starter... looks like back to research, need to compile a list of all the grap...

I need that sniffer!!!! It would help me with debugging/writing new code soooo much.

As for the difference, what was your force & speed settings? Seems like it was cutting harder on InkCut (it's set to 80g by default).

Thanks for posting this.

As of now, no. If you want you can edit the hpgl.py file. Lines 112 and 116/118 have the before and after data commands. replace this starting on line 108 def export(self,spl,copies=1): assert type(spl) == list, "export data must be a list of hpgl commands" spl = self.adjust(spl,copies) if...

This was fixed in v0.2, I should have made a separate button for it, I posted the solution in your topic. Thanks.

Oh, by the way, DMPL went extinct. I don't know why USCutter still supports that command set on their newer cutters.

Great, that was causing other cutters to hang in waiting mode. To fix with inkcut simply set the "Distance to feed after cut" to a negative number and it will return to the origin. (append the PU0,0; command)