This is a read-only archive of the inkscapeforum.com site. You can search for info here or post new questions and comments at Hi, sorry for my english, I'm french !
I'm a new Inkscape user.
I tried to draw a bicycle by drawing on a jpeg picture imported.
I draw some pieces (parts) but for some of them, it's impossible to move order-z : either this object is front or is back ! Impossible to move just one level.
Is someone can help me ?
Thanks.
Object order-z problem
Re: Object order-z problem
Hi.
Probably that's somewhere at the wheel and fork?
For a general workaround, check this article:
http://forum.inkscapecommunity.com/index.php?action=articles;sa=view;article=30
Probably that's somewhere at the wheel and fork?
For a general workaround, check this article:
http://forum.inkscapecommunity.com/index.php?action=articles;sa=view;article=30
Re: Object order-z problem
Without seeing the file, it's hard to guess what's happening. Have you Grouped anything? If you put 2 or more objects in a Group, it behaves as 1, and you can't move another object between the pieces.
You can attach your file, if you'd like us to look at it.
You can attach your file, if you'd like us to look at it.
Basics - Help menu > Tutorials
Manual - Inkscape: Guide to a Vector Drawing Program
Inkscape Community - Inkscape FAQ - Gallery
Inkscape for Cutting Design
Manual - Inkscape: Guide to a Vector Drawing Program
Inkscape Community - Inkscape FAQ - Gallery
Inkscape for Cutting Design
Re: Object order-z problem
Hi, I attached my file. I changed some colors to be more clear.
As you can see, I can't move easely the yello, blue and red sticks.
For the front gear, it's the same problem : impossible to move above the red stick...
Where is the problem ?
Just an indication : to the bars, I used the tool bezier curve
tool then "conour to way".
Thanks for your help...
As you can see, I can't move easely the yello, blue and red sticks.
For the front gear, it's the same problem : impossible to move above the red stick...
Where is the problem ?
Just an indication : to the bars, I used the tool bezier curve
tool then "conour to way".Thanks for your help...
- Attachments
-
- Biycle.svg
- (135.82 KiB) Downloaded 167 times
Re: Object order-z problem
The problem was the red object was on the root layer, while the others on layer 1.
Now they are all on one layer:
All objects were selected, then cut (Ctrl+X) and placed in position (Ctrl+Alt+V).
Now they are all on one layer:
All objects were selected, then cut (Ctrl+X) and placed in position (Ctrl+Alt+V).
Re: Object order-z problem
Thank you !!!
Here is the difference between an expert and a novice...
I have so much to learn...
Thanks again.
Here is the difference between an expert and a novice...
I have so much to learn...
Thanks again.
Re: Object order-z problem
Edit : No problem ! I did !
Thanks